With the continuous improvement of living taste, People's eyes began to shift to the decoration details of the appreciation. In the current architectural decoration, due to iron can be rigid and flexible, with good performance, the details of the depiction has other, incomparable material advantages, but also its rich, solid, wear-resistant and unique charm, let more and more users favor. Iron Gate often appears in people's lives, what is its construction plan?

Preparation for construction:

A good ironwork gate shall have a factory certificate and a test report when it enters the yard. Its specifications, models and dimensions shall comply with the design requirements. Put the window code in a safe place and cover it with wood. Avoid mistakes, otherwise late and customer cooperation.

Play Good Iron Gate location line, and according to the 50cm horizontal line, determine a good installation elevation.

Iron Gate unpacking, inspection and transport is more important, because customers do not want in the course of transport iron gate damage. Check the model and check the quality of the ironwork according to the requirements of the drawings. If it is found that there are corners and corners missing, warping irregularities, deviation exceeding the standard, serious damage and scratches, and large color difference, it should be carefully negotiated and trimmed, after qualification, can be installed, but also to check the iron gate with protective film, such as defects should be repaired, glued after the construction installation. Prepare scaffolding for installation and take safety precautions. Because safety in production is the principle we have been pursuing.

Key points of construction:

Iron Gate Hole treatment:

The installation method of iron art adopts the installation method of reserving the hole and the back plug. The horizontal position of the iron art hole should take the wall body 50cm line as the standard, goes up and down, measures the window hypodermis elevation, the elastic line looks straight. The theodolite is used to hit the two sides of the straight line on the wall to ensure the upper and lower lines of the windows of each floor. The gap between plastic steel frame and wall is 10-15mm on each side.

Iron Gate and wall connection:

The iron gate frame is connected with the wall by a fixed iron piece. That is, the iron piece is installed in the slot on the outside of the window frame with self-tapping screws, and then the iron gate frame is sent into the hole for positioning, tighten the expansion screw to fix the iron piece to the wall.

In a nutshell, it boils down to three things:

Material Inspection

Quality inspection form

Hidden Project